1
Telnet Commands
switchCfgTrunk
Enable or disable trunking on all the ports of a switch.
Synopsis
switchCfgTrunk 0|1
Availability
admin
Description
Use this command to enable or disable trunking on all the ports of a switch.
Note:
Operands
This command has the following operand:
0|1
Example
To enable trunking on a switch:
See Also
portCfgTrunkPort
portShow
portCfgShow
switchShow
1-250
This command requires the Trunking license.
Specify 1 to enable trunking on all the ports on this switch. Specify 0 to disable
trunking on all the ports on this switch. This operand is required.
switch:admin> switchCfgTrunk 1
Committing configuration...done.
Fabric OS Reference