Turboramtest - HP StorageWorks 8B - FC Entry Switch Reference Manual

Fabric os reference manual (version 3.0)
Hide thumbs Also See for StorageWorks 8B - FC Entry Switch:
Table of Contents

Advertisement

turboRamTest

Turbo SRAM logic test for 2Gb ASICs.
Synopsis
turboRamTest [passcount]
Availability
admin
Description
This command verifies the on chip SRAM located in the 2Gb ASIC using the Turbo-Ram BIST
circuitry. These same SRAMS are tested by portRegTest and sramRetentionTest using PCI
operations, but for this test the BIST controller is able to perform the SRAM write and read
operations at a much faster rate. It is also able to test one SRAM in each quadrant of every chip in
parallel.
The following RAMs and CAMs will be tested using TurboRAMtest logic:
1.
TX Buffer List Descriptor RAM
2.
TX Q Arb Loop FIFO RAM
3.
Statistics RAM
4.
ALPA Match RAM
5.
External Unicast Routing Table RAM
6.
Internal Unicast Routing Table RAM
7.
Multicast Routing Table RAM
8.
TX Buffer Link RAM
9.
RX Buffer Frame Tail RAM
10. RX Buffer Frame Link RAM
11. TX Buffer Descriptor RAM (Output/Input Frame Tracking, Buffer State)
12. Private RAM
13. Phantom CAM
14. Phantom DID RAM
15. Phantom ALPA RAM
16. Frame Filtering Destination Group Table RAM
17. Frame Filtering Source Group Table RAM
18. Field Definition Block RAM
19. Frame Filtering Destination CAM
20. Frame Filtering Source CAM
21. Special Memory RAM
Fabric OS Reference
1
Telnet Commands
1-273

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric osStorageworks fc entry switch 8b

Table of Contents