Switchshow - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

switchShow

Display switch and port status.
Synopsis
switchShow
Availability
All users
Description
Use this command to display switch and port status information. Information may vary by switch
model. Below is the information provided. The first section provides switch summary information;
it is followed by a section covering summary information by port.
Switch summary information:
switchName
switchType
switchState
switchRole
switchDomain
switchId
switchWwn
switchBeacon
The switch summary is followed by one line per port:
port number
module type
port speed
port state
1-254
Switch symbolic name.
Switch firmware revision number.
Switch state: online, offline, testing, faulty.
Switch role: principal, subordinate, disabled.
Switch domain ID: 0-31 or 1-239.
Switch embedded port D_ID.
Switch worldwide name.
The switch's beaconing state (either ON or OFF).
Port number. Valid values vary depending on the switch type.
Port module type (GBIC or other):
-- no module present
sw - shortwave laser
lw - longwave laser
id - serial ID
The speed of the port:
1G - 1G per second fixed transfer speed
2G - 2G per second fixed transfer speed
N1 - 1G per second negotiated transfer speed
N2 - 2G per second negotiated transfer speed
AN - Auto negotiating
Port state information:
No_Card - no interface card present
No_Module - no module (GBIC or other) present
No_Light - module not receiving light
Fabric OS Reference