Errshow - HP StorageWorks 8B - FC Entry Switch Reference Manual

errShow

Scroll through the error log.
Synopsis
errShow
Availability
All users
Description
Use this command to display the error log. This command enables you to scroll through the entries
using the Enter key. Use errDump to display the same information without line breaks.
Each entry in the log follows the format below:
Error Number
------------
taskId (taskName): Time Stamp (count)
Error Type, Error Level, Error Message
Diag Err#
where:
Error Number
Task ID (Task Name)
Time Stamp
Error Count
Error Type
Error Level
Error Message
Diag Err#
Fabric OS Reference
Each error in the log is assigned a number beginning with one. If the number of
errors exceeds the size of the log, the most recent errors are shown.
The ID and name of the task recording the error.
The date and time of the first occurrence of the error.
For errors that occur multiple times, the repeat count is shown in parenthesis. The
maximum count is 999.
An upper case string showing the firmware module and error type. The switch
manual contains a detailed explanation of error types.
0 = panic (the switch reboots)
1 = critical
2 = error
3 = warning
4 = information
5 = debug
Additional information about the error.
The error code number. This is a hexadecimal 4-digit code representing the error
type.
1
Telnet Commands
1-63