1
Telnet Commands
dlsShow
Display the setting of the Dynamic Load Sharing (DLS) option.
Synopsis
dlsShow
Availability
All users
Description
Use this command to display whether DLS is on or off. There can be two messages displayed:
DLS is set
DLS is not set
Operands
None.
Example
To display the current DLS option setting:
See Also
dlsSet
dlsReset
1-60
The DLS option is turned on. Load sharing is reconfigured with every change in
the fabric.
The DLS option is turned off. Load sharing is only reconfigured when the switch
is rebooted or an Nx_Port comes up.
switch:admin> dlsShow
DLS is set
Fabric OS Reference
Need help?
Do you have a question about the StorageWorks 8B - FC Entry Switch and is the answer not in the manual?