Sgroupsupportshow - HP StorageWorks 8B - FC Entry Switch Reference Manual

sgroupSupportShow

Displays switch information for all switches within the specified group.
Synopsis
sgroupSupportShow "sgroupName"[, "commandName"]
Availability
All users
Description
This command can display a range of debugging information for all the switches in a switch group.
If no commandName is specified or all is specified in place of a command name, all the supported
commands are displayed for the all the switches within a switch group. If a single command is
specified, only the information for that command is displayed.
Note:
Operands
This command has the following operands:
sgroupName
commandName Specify the name of the command to be displayed for the specified switch group.
Fabric OS Reference
This command is for the FC 6164 switch only.
Specify the name of the switch group enclosed in quotation marks. This operand
is required.
If no command is specified, or all is specified, all the supported commands are
executed against all the switches within a switch group. Below is a list of
command names that are supported in the order they are executed. These
command names are not case sensitive. The command must be enclosed in
quotation marks. This operand is optional.
version
uptime
tempShow
psShow
licenseShow
diagShow
errDump
switchShow
portFlagsShow
portErrShow
mqShow
portSemShow
portShow
Telnet Commands
portRegShow
portRouteShow
fabricShow
topologyShow
qlShow
nsShow
nsAllShow
cfgShow
configShow
faultShow
traceShow
portLogDump
1
1-231