Perfclralpacrc - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

perfClrAlpaCrc

Clear an ALPA device's CRC count by the port and ALPA.
Synopsis
perfClrAlpaCrc port[, ALPA]
Availability
admin
Description
Use this command to clear specific ALPA device's CRC error counter. If the ALPA is provided as
an operand only the counters for that device are reset; if no ALPA is specified this command clears
the CRC counters for all ALPA devices on the specified port.
Operands
This command has the following operands:
port
ALPA
Example To clear CRC count on a particular ALPA on port 15, and then clear CRC count for all ALPAs on
port 15:
See Also
perfShowAlpaCrc
1-154
Specify the port number where you want to reset the CRC error counters. This
clears the CRC error counter for all ALPA devices connected to the port. This
operand is required.
Specify the ALPA address if you want to clear the CRC error counter for a
particular device. This operand is optional.
switch:admin> perfClrAlpaCrc 15, 0x59
CRC error count at ALPA 0x59 on port 15 is cleared.
switch:admin>
switch:admin> perfClrAlpaCrc 15
This will clear all ALPA CRC Counts on port 15
Do you want to continue? [y|n]y
Please wait ...
All alpa CRC counts are cleared on port 15.
switch:admin>
Fabric OS Reference