HP StorageWorks 8B - FC Entry Switch Reference Manual page 52

1
Telnet Commands
If you enter the command with no operands, you are prompted for the appropriate values:
Errors
Listed below are possible reasons for a failure of this command:
•
The host name is not known to the switch
•
The host IP address cannot be contacted
•
The user does not have permission on the host
•
The user runs a script that prints something at login
•
The RSHD or FTP server is not running on the host
See Also
configDefault
configDownload
configShow
configure
1-38
switch:admin> configUpload
Server Name or IP Address [citadel]: 192.168.15.42
User Name [None]: user21
File Name [config.txt]: config-switch.txt
Protocol (RSHD or FTP) [FTP]: ftp
Password: xxxxxx
upload complete
switch:admin>
Fabric OS Reference