Quickloop Fabric Assist Mode Commands; Extended Fabric Command - HP StorageWorks 8B - FC Entry Switch Reference Manual

Table 3-2
Command
qlPortEnable
qlShow
qlStatsShow
qlPortShowAll

QuickLoop Fabric Assist Mode Commands

The following commands are for QuickLoop Fabric Assist Mode. For detailed information about
QuickLoop Fabric Assist refer to the QuickLoop User's Guide.
Table 3-3
Command
fazoneAdd
fazoneCreate
fazoneDelete
fazoneRemove
fazoneShow
faShow
faStatsShow

Extended Fabric Command

The following commands are available with the purchase of a Extended Fabrics license key. For
detailed information about Extended Fabrics refer to the Distributed Fabrics User's Guide.
Table 3-4
Command
portCfgLongDistance
Fabric OS Reference
QuickLoop Commands (Continued)
Description
Enables a QuickLoop port to QuickLoop mode
Displays QuickLoop information.
Displays QuickLoop statistics.
Displays QuickLoop port information
QuickLoop Fabric Assist Mode Commands
Description
Add member(s) to an existing QuickLoop Fabric Assist zone.
Creates a QLFA zone.
Delete an existing QuickLoop Fabric Assist zone.
Remove member or members from an existing QuickLoop
Fabric Assist zone.
Display QuickLoop Fabric Assist zone information.
Displays the port number and PID for each Fabric Assist host
port located on this switch. It will also display a listing of each
Target that has a Fabric Assist phantom on the host's port. The
target's PID, assigned phantom ALPA and current online or
offline status will all be displayed.
Displays a set of statistics for each QLFA host on the switch.
Extended Fabric Commands
Description
Configure a port to support long distance links.
Licensed Telnet Commands
3
3-3