Configdefault - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
Telnet Commands

configDefault

Reset a subset of configuration settings to the default values.
Synopsis
configDefault
Availability
admin
Description
Use this command to reset certain configuration settings to the default values.
All configuration parameters, with the following exceptions, are reset to default values:
•
Ethernet MAC address, IP address, and subnetmask
•
IP gateway address
•
License keys
•
OEM customization
•
SNMP configuration
•
System name
•
World Wide Name
•
Zoning configuration
Note:
Note:
Some configuration parameters are cached by the system. To avoid unexpected switch behavior,
reboot the system after executing this command.
Operands None.
Example To restore the system configuration to default values:
See Also
agtcfgDefault
configure
switchDisable
switchEnable
1-32
Refer to the configure command for more information on default values for configuration
parameters.
This command may not be executed on an enabled switch. You must first disable the switch
using the switchDisable command.
switch:admin> configDefault
Committing configuration...done.
Fabric OS Reference