Qlstatsshow - HP StorageWorks 8B - FC Entry Switch Reference Manual

qlStatsShow

Displays QuickLoop statistics.
Synopsis
qlStatsShow
Availability
All users
Description
Use this command to display the following QuickLoop switch statistics:
Last QL init time:
QL init attempted:
QL init succeeded:
Single switch QL:
Dual switch QL:
QL enabled: Number of times QuickLoop is enabled
QL disabled:
Port caused QL init:
Operands
None.
Example
The following entry displays QuickLoop switch statistics:
See Also
portStatShow
qlShow
Fabric OS Reference
Time of last QuickLoop initialization
Number of QuickLoop initialization attempts
Number of times QuickLoop is initialized
Number of times as single switch QuickLoop. These numbers are only valid
when two switches are configured to run as peers in QuickLoop.
Number of times as dual switch QuickLoop. These numbers are only valid when
two switches are configured to run as peers in QuickLoop.
Number of times QuickLoop is disabled
Port that caused last QuickLoop initialization
switch:admin> qlStatsShow
Quick loop statistics for switch 1
Last QL init time
QL init attempted
QL init succeeded
Single switch QL
Dual switch QL
QL enabled
QL disabled
Port started last init
switch:admin>
Telnet Commands
: Jan 1 00:00:00.000
: 0
: 0
: 0
: 0
: 0
: 0
: 0 on switch 0
1
1-217