Telnet Commands
agtcfgDefault
Reset the SNMP agent configuration to default values.
Synopsis
agtcfgDefault
Availability
admin
Description
Use this command to reset the configuration of the SNMP agent to default values:
•
sysDescr - The default value is Fibre Channel Switch.
•
sysLocation - The default value is End User Premise.
•
sysContact - The default value is Field Support.
•
swEventTrapLevel - The default value is 0 (off).
•
authTraps - The default value is 0 (off).
•
The IP addresses of the trap recipient for each community defaults to 0.0.0.0 or no trap
recipient. The 6 communities are:
Community 1: Secret C0de
Community 2: OrigEquipMfr
Community 3: private
Community 4: public
Community 5: common
Community 6: FibreChannel
Note:
Operands
None.
Fabric OS Reference
For more information about SNMP configuration parameters refer to the agtcfgSet
command.
Chapter
1
1-1