Qlportenable - HP StorageWorks 8B - FC Entry Switch Reference Manual

qlPortEnable

Enables a QuickLoop port.
Synopsis
qlPortEnable port
Availability
admin
Description
Use this command to change the specified port from fabric mode to QuickLoop mode. This
includes any devices connected to this port in the QuickLoop, and causes the switch to re-initialize
the QuickLoop.
If the switch that the port belongs to has a partner, and the partner is running in QuickLoop mode,
both switches re-initialize their QuickLoops to form a new loop that includes the devices connected
to this port.
The specified port must be in fabric mode for this command to have effect.
Operands This command has the following operand:
port
Example
The following entry changes port 4 from fabric mode to QuickLoop mode:
See Also
qlEnable
qlPortDisable
qlShow
Fabric OS Reference
Specify the port number to be modified from fabric mode to QuickLoop mode.
Valid values for port number vary depending on the switch type. This operand is
required.
switch:admin> qlPortEnable 4
1
Telnet Commands
1-213