Comtech EF Data CDM-570L Installation And Operation Manual page 51

Param File Tag
Rt#0 .... Rt#nnn
ROUTE_HDLC_ADDR_SAVE
DHCP_RELAY_IP_ADDR
REDUNDANCY_ACTIVE
BASE_BOOT_IMAGE
UPGRADE_SLOT
BLINDLOAD_MCAST_ADDR
ADMIN_PWD
READWRITE_PWD
READONLY_PWD
Page 15 of 54 47
Values Associated with Parameter
Route table entries Rt#0 is the first entry and can go upto 256 entries.
[No need to read this from param file, use RTG]
Corresponding HDLC Addresses for Ethernet Sat entries. [No need to read this from param file, use RTG]
DHCP Server IP Address. Possible values are
NOT-DEFINED – When the parameter not set.
10.20.30.40 – When a DHCP Server IP Address is set.
Enabled
Disabled
Possible values are
Latest
Image 1
Image 2
Oldest
Image 1
Image 2
NOT-DEFINED when ip_addr is 0
Valid multicast IP address like 239.4.5.6
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
MN/CDM570L.AA4