Comtech EF Data CDM-570L Installation And Operation Manual page 358

CDM-570/570L Satellite Modem with Optional IP Module
IP Module - CLI and Telnet Operation
Menu Options/Fields
Upgrade To
Codecast Multicast Address
PARAM Image
Statistics
Event Log
Database Operations
Reset
Diagnostics
Save Parameters
Exit
Entry
U
Determines which installed software package that the
M
odule or base modem firmware will overwrite when
upgrading with a new software package. The possible
options are:
0. Oldest – overwrite the oldest software package based
upon date.
1. Image1 – overwrite the software package loaded into
the first slot in permanent storage.
2. Image2 – overwrite the software package loaded into
the second slot in permanent storage.
M Multicast address used by Vload to upgrade the modem
firmware and param file via streaming multicast. Must
match the address specified in Vload.
C Identifies the PARAM file that will be loaded on bootup.
The options are:
1. Last saved Parameter file
2. Factory – uses the internal, hard-coded factory
default parameters.
T Activates Statistics Menu page.
E Activates Event Log page.
Activates Database Operations page.
D
R Allows user to reboot the modem (includes the IP
modem and base modem). It has the same logical effect
of power-cycling the unit.
Activates Diagnostics page.
G
S This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
This option allows a user to exit the current menu and
X
return to its parent menu.
17–58
MN/CDM570L.IOM
Description
Revision 4
IP