Comtech EF Data CDM-570L Installation And Operation Manual page 20

Command Arguments
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
IGMP IGE= 1 byte, value
enable/disable of 0 or 1
Access List ACE= 1 byte, value
Enforcement of 0 or 1
Ping Reply PRE= 1 byte, value
Enabled of 0 or 1
Telnet Enabled TLE= 1 byte, value
of 0 or 1
SNMP SPE= 1 byte, value
Enabled of 0 or 1
Downlink DRM= 1 byte, 0 or 1
Route All
Multicast
Page 14 of 54
Description of Arguments
to Query
Command or Query
where,
0=Disabled
1= Enabled
Enables or disables the IGMP feature.
Command or Query
where,
0=Disabled
1= Enabled
Enables or disabled access list enforcement.
Command or Query where,
0=Disabled
1= Enabled
Enables or disables ping reply. When disabled, the modem will not
respond to pings (network security feature)
Command or Query where,
0=Disabled
1= Enabled
Enables or disables the telnet interface. When disabled, the user
will not be able to log in to the telnet interface.
Command or Query where,
0=Disabled
1= Enabled
Enables or disables the snmp interface. When disabled, the user
will not be able to use the snmp interface.
Command or Query where,
0=Disabled
1=Enabled
Enable/Disable Downlink Route All Multicast option.
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
IGE = IGE? IGE =x
IGE! (see description of
arguments)
ACE = ACE? ACE =x
ACE! (see description of
arguments)
PRE = PRE? PRE =x
PRE! (see description of
arguments)
TLE = TLE? TLE =x
TLE! (see description of
arguments)
SPE = SPE? SPE =x
SPE! (see description of
arguments)
DRM= DRM? DRM=x
DRM! x – 0 or 1.
MN/CDM570L.AA4