Comtech EF Data CDM-570L Installation And Operation Manual page 33

Command Arguments
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
IGMP Client: ICV 1 byte, 0 or 1
Version
IGMP Client: IRI= 2 bytes 0..25
Unsolicated
Report
Internval
IGMP View None String value
Table
Page 15 of 54 29
Description of Arguments
to Query
Command or Query
where,
Set the IGMP Version for Unsolicited Reports.
0=V1
1= V2
Recognize IGMP Queries
Example: ICV =0
Command or Query
where,
Set the unsolicited Report Interval [Modem as Client]
Range = 1..25
Example: <1/IRI =14
Query only.
Display the IGMP table with different states. To see the entries, the
system should have the IGMP feature enabled, and should be
properly configured to forward IGMP packets. See WEB interface
for proper table format.
Note: Not yet supported in 1.5.3 Release. Will available in next
release.
Query
Response to (Instruction
Command Code and
Qualifier)
ICV = ICV?
ICV!
IRI = IRI?
IRI!
IGT= IGT?
IGT!
MN/CDM570L.AA4
Response to Query
ICV =xxx
(see description of
arguments)
IRI =xxx
(see description of
arguments)
IGT=sssssss
Table of IP Addresses
and their state
information.