Comtech EF Data CDM-570L Installation And Operation Manual page 32

Command Arguments
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
Delete an ARP ARD= ARD=xxx.xxx
entry .xxx.xxx
IGMP Server: IGQ= IGQ=xxx
IGMP Query Where xxx is 1
Period to 600
IGMP Server: IMR= IMR=xxx
IGMP Max Where xxx is
Resp. Time value of 1 to
598
IGMP Server: INM= 2 bytes,
Number of Numerical
Missed 1..30
Responses
IGMP Client IRQ= 1 byte, 0 or 1
Recognize
Queries
IGMP IRO= 1 byte, 0 or 1
Client Router
Alert Option
for V1
Page 14 of 54
Description of Arguments
to Query
Command Only.
Delete the ARP entry associated with the specified IP Address.
xxx.xxx.xxx.xxx IP address of ARP entry to delete.
Example: <1/ARD=192.168.001.100
Command or Query
Set the IGMP Query period in seconds while modem acting as
IGMP Server.
Command or Query
Set the Maximum response time for the IGMP Query in seconds.
Should always be 2 less than query period. The range is 1 to (IGQ
– 2). If IGQ is at 30, then IMR can be set from 1 through 28.
Command or Query.
Number of missed responses before leaving the IGMP Group.
Configured from 1...30
Example: INM=15
Command or Query
where,
0=No
1= Yes
Enable/Disable Recognizing IGMP Queries.
Example: IRQ=0
Command or Query
where,
0=No
1= Yes
Enable/Disable Router Alert option for V1 Reports.
Example: IRO =0
Query
Response to (Instruction
Command Code and
Qualifier)
ARD = N/A
ARD!
IGQ= IGQ?
IGQ!
IMR= IMR?
IMR!
INM = INM?
INM!
IRQ = IRQ?
IRQ!
IRO = IRO?
IRO!
MN/CDM570L.AA4
Response to Query
ARD=xxx.xxx.xxx.xxx
(see description of
arguments)
IGQ=xxx
xxx – value of 1 to 600.
IMR=xxx
xxx - value of 1 to 598.
INM =xxx
(see description of
arguments)
IRQ =xxx
(see description of
arguments)
IRO =xxx
(see description of
arguments)