Comtech EF Data CDM-570L Installation And Operation Manual page 41

Command Arguments
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
Number of N/A RTN=3 bytes,
route entries numerical
Delete route RTD= RTD=4 bytes,
entry numerical
Route Table N/A N/A
Get
Page 15 of 54 37
Description of Arguments
to Query
Query Only.
Returns the number of route entries in the route table.
Note: This command should be issued whenever a new route is
added/deleted.
Command Only.
Deletes the route entry at the specified index number, if configured.
Returns RTD!, if there is no route at the index.
Query only.
Get the whole Routing Table of the modem. Each route entry is
separated by '\r' [chr(13)]
The route table will be displayed only if system's working mode is
"Router –Small, Router-Large, Router-PtP. If the system is in
EasyConnect mode, it may return RCG!
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
RTN = RTN? RTN = xxxx
RTN! (see description of
arguments)
RTD = RTD! RTD = xx.xx
(see description of
arguments)
RCG! RCG? RCG=
xxxxxxxxxxxxxx
xxxxxxxxxxxxxx
MN/CDM570L.AA4