Comtech EF Data CDM-570L Installation And Operation Manual page 374

CDM-570/570L Satellite Modem with Optional IP Module
IP Module - CLI and Telnet Operation
17.2.9.4 Database Operations Page
Database Operations Page is activated from Operations and Maintenance Page.
The Database Operations option allows the user to view, save, or erase an existing user
configuration of the IP Module. An IP Module uses these types of configuration files to
initialize itself on power-up.
The User Configuration File allows a User to over-write the values defined in the Factory
Configuration file. This allows full customization of a IP Module without erasing a set of
parameters defined from the factory. The User configuration file can also be retrieved or
overwritten via FTP by specifying the filename 'param1'.
The Administrative Database Operations Page contains the following options/fields:
Menu Options/Fields
Restore Factory Default
Load Parameters from
permanent storage
Save Parameters
Exit
Entry
R IP M
Restores the
defined by the factory.
P
This option overwrites the current configuration of the
M
odule with the configuration last saved to permanent
storage. It allows the user to perform an "Undo" type
operation if the
state by the user.
S This option allows a user to save the current
configuration of the
This configuration will be restored on each successive
power cycle.
This option allows a user to exit the current menu and
X
return to its parent menu.
17–74
Description
odule settings to "safe" values as
IP M
odule is put into an undesirable
IP M
odule to permanent storage.
Revision 4
MN/CDM570L.IOM
IP