Comtech EF Data CDM-570L Installation And Operation Manual page 19

Command Arguments
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
Administrator ADP= 11 bytes
Password No spaces
allowed.
ReadWrite RWU= 11 bytes
UserName No spaces
allowed.
ReadWrite RWP= 11 bytes
Password No spaces
allowed.
ReadOnly ROU= 11 bytes
UserName No spaces
allowed.
ReadOnly ROP= 11 bytes
Password No spaces
allowed.
Access Client ACL= 18 bytes,
List numerical
Access List ACD=x 1-byte
Delete numerical
1...4
Page 15 of 54 15
Description of Arguments
to Query
Command or Query.
Change the administrator password, where:
Example: ADP=comtech
Command or Query.
Change the ReadWrite username, where:
Example: RWU =comtech
To get the new user name effective, RWP must be issued
Immediately after RWU.
Command or Query.
Change the ReadWrite password, where:
Example: RWP =comtech
Command or Query.
Change the ReadOnly username, where:
Example: ROU =comtech
To get the new user name effective, ROP must be issued
Immediately after ROU.
Command or Query.
Change the ReadOnly password, where:
Example: ROP =comtech
Command or Query.
Used to set the Access list entry, which contains a subnet and mask.
Once the access list is enabled, only devices from the allowed
ranges are allowed to communicate with the modem.:
xxx.xxx.xxx.xxx/yy, where:
xxx.xxx.xxx.xxx is the IP address, and
yy is the network prefix (0-31)
Returns 000.000.000.000/32 when a particular Access Client is not
configured.
Example: <1/ACL[1]=010.006.030.001.24
Command only.
Delete the specified access list entry from the access list table.
<1/ACD=x, where x is value of 1...4
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
ADP = ADP? ADP =xxxxxxxxxxx
ADP! (see description of
arguments)
RWU = RWU? RWU =xxxxxxxxxxx
RWU! (see description of
arguments)
RWP = RWP? RWP =xxxxxxxxxxx
RWP! (see description of
arguments)
ROU = ROU? ROU =xxxxxxxxxx
ROU! (see description of
arguments)
ROP = ROP? ROP =xxxxxxxxxxx
ROP! (see description of
arguments)
ACL = ACL? ACL=
ACL! xxx.xxx.xxx.xxx.yy (see
description of
arguments)
ACD= N/A ACD=x [1..4]
ACD! (see description of
arguments)
MN/CDM570L.AA4