Comtech EF Data CDM-570L Installation And Operation Manual page 302

CDM-570/570L Satellite Modem with Optional IP Module
IP Module - CLI and Telnet Operation
IMPORTANT
The CLI and Telnet Access Levels are defined as follows:
User Interface
CLI
(direct to console port)
Telnet
Default Name/Passwords are:
•
Admin
•
Read/Write
•
Read Only
Any changes made to the base modem and IP Module will be lost if the IP
Module is reset or loses power unless the changes are saved to permanent
storage. This applies to all of the IP Module and base modem parameters.
The parameters can be saved by selecting "S", available on any CLI/Telnet
Menu page.
Note: As of CDM-IP version 1.5.3, all parameters for the modem are stored
in the IP Module parameter file. This provides a single file to store the
entire contents of the modem.
User Login Access Level
Admin User
Full Access – no Login
Full Access
all Menus
comtech/comtech
opcenter/1234
monitor/1234
Read/Write User
No Access to Admin Menu
Full Access all other Menus
17–2
Revision 4
MN/CDM570L.IOM
Read Only User
No Access