Comtech EF Data CDM-570L Installation And Operation Manual page 437

CDM-570/570L Satellite Modem with Optional IP Module
Appendix F
F.3.3.33 (ODU,ENABLE,1:1,CSAT#1,CONFIG,MISCELLANEOUS)
(ODU,ENABLE,1:1,CSAT#2,CONFIG,MISCELLANEOUS)
(ODU,ENABLE,STAND-ALONE,CONFIG,MISCELLANEOUS)RTC
Sync ODU RTC to Lcl RTC:
Yes
The user is prompted to select either Yes or No, using the ◄ ► arrow keys, then to press
ENT. Selecting Yes will cause the CSAT Real Time Clock (RTC) to be synchronized
with the Modem RTC.
F.3.3.34 (ODU,ENABLE,1:1,CSAT#1)
(ODU,ENABLE,1:1,CSAT#2)
(ODU,ENABLE,STAND-ALONE)
INFO: Model Transmitter
Receiver LNA Misc
The operator uses this menu item to select enter 1 of 5 'Information Windows'. Use the
◄ ► arrow keys, then press ENT.
F.3.3.35 (ODU,ENABLE,1:1,CSAT#1,INFO)
(ODU,ENABLE,1:1,CSAT#2,INFO)
(ODU,ENABLE,STAND-ALONE,INFO)
CSAT-5060/010
SERIAL # 00225
This window provides the CSAT Model Number and Serial Number, press ENT.
F.3.3.36 (ODU,ENABLE,1:1,CSAT#1,INFO)
(ODU,ENABLE,1:1,CSAT#2,INFO)
(ODU,ENABLE,STAND-ALONE,INFO)
Tx: ON
AMP:ON
This window provides the CSAT Transmitter information including transmitter status,
Tx Frequency, Tx Attenuation, Amplifier state, Tx Mute state and Tx Slope adjustment.
Press ENT.
◄ ►,
No ( ENT)
(◄ ►)
V2.09
(ENT)
5845.0MHz 10.00dB
Unmuted Sl:0.0
INFO (Information)
INFO (Information)
INFO (Information)
F–13
MN/CDM570L.IOM
MODEL
MODEL
MODEL
TRANSMITTER
TRANSMITTER
TRANSMITTER
Revision 4
RTC
RTC