Chapter 14. Ethernet Management (Base Modem); Introduction; Ethernet Management Interface Protocols - Comtech EF Data CDM-570L Installation And Operation Manual

14.1

Introduction

The base modem is equipped with an RJ-45, 10/100BaseT Ethernet management
interface used for monitor and control purposes.
Note that the optional IP module does NOT need to be installed.
This chapter of the manual will provide a high-level overview of the functionality
provided by this interface and references other chapters for further details.
14.2

Ethernet Management Interface Protocols

The modem 10/100BaseT Ethernet Management Interface supports three (3) different
management protocols:
•
•
•
In general, the operation of each of these interfaces is essentially identical to the
management interfaces that are available when the optional IP module is installed.
Chapter 14. ETHERNET
Web Server interface for complete product management
SNMP with public and private MIB
Telnet interface for remote product M&C
MANAGEMENT
(Base Modem)
14–1