Comtech EF Data CDM-570L Installation And Operation Manual page 18

Command Arguments
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
Header HRU= 3 bytes
Compression
Refresh rate –
UDP
Header HRA= 3 bytes
Compression
Refresh rate –
All Others
Payload PRA= 3 bytes
Compression
Refresh rate
Telnet timeout TET= 2 bytes
Administrator ADU= 11 bytes
UserName No spaces
allowed.
Page 14 of 54
Description of Arguments
to Query
Command or Query.
Header compression refresh rate, 1 to 600
Resolution=1 packet
Refresh rate for UDP only stream.
Example: HRU =50
Restrictions: 570 only
Command or Query.
Header compression refresh rate, 1 to 600
Resolution=1 packet
Refresh rate for all other streams.
Example: HRU =50
Restrictions: 570 only
Command or Query.
Payload compression refresh rate, 1 to 600
Resolution=1 packet
Refresh rate for all other streams.
Example: PRU =50
Restrictions: 570 only
Command or Query.
Telnet log in timeout, 1 to 60
Resolution=1 minute
Inactivity timeout on cli menu screen.
Example: <1/TET=50
Command or Query.
Change the administrator username, where:
Example: ADU=comtech
To get the new user name effective, ADP must be issued
Immediately after ADU. Then query ADU? to see the new.
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
HRU = HRU? HRU =xxx
HRU! (see description of
arguments)
HRA = HRA? HRA =xxx
HRA! (see description of
arguments)
PRA = PRA? PRA =xxx
PRA! (see description of
arguments)
TET = TET? TET =xx
TET! (see description of
arguments)
ADU = ADU? ADU =xxxxxxxxxxx
ADU! (see description of
arguments)
MN/CDM570L.AA4