Comtech EF Data CDM-570L Installation And Operation Manual page 251

CDM-570/570L Satellite Modem with Optional IP Module
Serial Remote Control
Command Arguments
Parameter (Instruction for Command
Type Code and or Response
Qualifier)
Force 1:1 FSW= None
Switch
Circuit ID CID= 24 bytes
String
Description of Arguments
to Query
Command only.
Forces the unit to toggle the Unit Fail relay to the 'fail' state for
approx 500ms. If the unit is a 1:1 pair, and it is currently the 'On
Line' unit, this will force a switchover, so the unit will then be in
'Standby' mode. The command is always executed by the unit,
regardless of whether it is stand-alone, in a 1:1 pair, or part of a
1:N system. This command takes no arguments.
Command or Query.
Sets or queries the user-defined Circuit ID string, which is a fixed
length of 24 characters.
Valid characters include:
Space ( ) * + – , . / 0 9 and A thru Z
Response to
Command
FSW=
(message
ok)
CID=
CID?
CID*
CID#
13–17
Revision 4
MN/CDM570L.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
N/A N/A
CID? CID=xxxxxxxxxxxxxxx
xxxxxxxxx
(see description of
arguments)