Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual page 1059

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
Glossary
S
SAA
SA buttons
Satellite System
Screen Pop
SDN
Series
Configuration
Service Observing
SID
Signaling
Simplex Signaling
Single-Line
Telephone
Slot
SMDR
SMDR Printer
Supplemental Alert Adapter . Device that permits alerting
equipment to be connected to an analog multiline
telephone jack so that people working in noisy or remote
areas of a building can be alerted to incoming calls.
Telephone buttons that provide access to both inside and
outside calls.
In a private network, a communications system that is
directly connected to, and located within 200 miles of the
local system.
Refers to a computer-telephony software application that
takes caller information (for example, the calling party
number provided by Caller ID service), queries a database,
and displays a screen with information about the caller onto
a user's PC screen. Screen pop requires that an identifying
number or code be available to identify the calling party.
See also CTI Link .
Software Defined Network . AT&T private networking
service created by specialized software within the public
network.
Private network arrangement whereby either two or four or
more communications systems are connected in a line,
with no particular system acting as the hub system . See
Star Configuration
also
Feature available in Release 6.1 and later systems that
allows one extension to listen in on (observe) calls that
arrive at another extension.
Station (Extension) Identification .
Sending of information between devices to set up,
maintain, or cease a connection, such as a telephone call.
Transmission of signals in one direction only, across a
telecommunications channel.
Industry-standard touch-tone or rotary dial telephone that
handles one call at a time. It is connected to the system via
an extension jack on an 012 (T/R), 016 (T/R), or 008 OPT
module; or, in Release 7.0 and later systems, via a port on
a 412 LS-ID-ETR or 016 ETR module programmed for tip/
ring operation.
Position in a carrier for a module; numbered from 0.
Station Message Detail Recording . Feature that captures
usage information on incoming and outgoing calls.
Printer used to produce SMDR reports. Connected to the
system via an RS-232 jack on the processor module .
.
Issue 1
April 1999
GL-25