Analog Multiline Telephones - Lucent Technologies MERLIN LEGEND Release 7.0 System Programming Manual

MERLIN LEGEND Communications System Release 7.0
System Programming 555-670-111
H Programming Special Characters

Analog Multiline Telephones

Analog Multiline Telephones
Some dialing sequences need special characters. For example, the user presses
Hold to insert a Pause character after the dial-out code in a dialing sequence to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Table H-2.
Press...
2
Drop
Hold
Conference
##
#
1 Display telephones only.
2 Not available on MLC-5, MDC 9000, and MDW 9000 cordless and cordless/wireless telephones.
Special Characters for Analog Multiline Telephones
1
See ... Means...
Stop. Inserts a Stop within a sequence of
s
automatically dialed numbers. For example, an
outside Auto Dial button may be programmed with a
password, then a Stop, then a telephone number. To
use Auto Dial with a Stop in the sequence, the user
presses the button to dial the password, listens for
the dialing and connection, and presses the button
again to dial the number.
Pause. Inserts a 1.5-second pause in the dialing
p
sequence. Multiple consecutive pauses are allowed.
2
Flash. Sends a switchhook flash. Must be the first
f
entry in the dialing sequence.
End of Dialing for Auto Dial buttons. Used at the
#
end of a dialing sequence to indicate that the user
has finished dialing or to separate one group of
dialed digits from another.
End of Dialing. Used at the end of a dialing
#
sequence to indicate that the user has finished
dialing or to separate one group of dialed digits from
another.
4
Issue 1
April 1999
H-2