Control Processor Commands; Commands Supported On The Active Cp; Commands Supported On The Standby Cp - HP StorageWorks 2/64 - Core Switch Command Reference Manual

6 Control processor commands

This chapter lists the commands available when logged in to the active CP and standby CP in an HP
StorageWorks Core Switch 2/64, HP StorageWorks SAN Director 2/128, or HP StorageWorks 4/256
SAN Director.

Commands supported on the active CP

When logged in to the active CP on a Core Switch 2/64, you must specify the logical switch number to
which you are connecting. This guarantees that any commands you execute are run on the desired
logical switch. Once you have selected a logical switch, the full set of commands for your user level are
available.

Commands supported on the standby CP

The following commands are supported when logged into the standby CP.
Table 29

Commands supported on the standby CP

Command
date
errClear
errDump
fastBoot
firmwareCommit
firmwareDownload
firmwareDownloadStatus
firmwareRestore
firmwareShow
h
haDump
haShow
help
ifModeSet
ifModeShow
Description
Print/set the system date and time.
Clear error log.
Print error log (no page breaks).
Reboot this switch, bypassing POST.
Commit firmware to stable storage.
Download firmware into switch.
Display the progress and status of firmwaredownload.
Restore the old firmware in the switch.
Display firmware versions in the switch.
Print shell history.
Dump HA debug data.
Print High Availability status.
Print this list.
Set the link operating mode for a network interface.
Display the link operating mode for a network interface.
Fabric OS 5.x command reference guide 787