setVerbose
Specifies module verbose level.
Synopsis
setverbose [module_name] [level]
Availability
admin
Description
Use this command to set the verbose level of the specified module. These levels filter the display of the
debug messages to the serial console. By default, no debug messages are displayed.
Operands
This command has the following operands:
module_name
-level
Examples
To set the verbose level of a module named NS to value 3:
switch:admin> setverbose NS 3
switch:admin> dbgshow NS
Module NS, debug level = 0, verbose level = 3
See also
dbgShow
624 Fabric OS commands
Specify the name of the module for which verbose level is to be
set; module names are case sensitive.
Specify the verbose level (0 to 9).