Command Reference For Service Processor Commands; Service Processor (Mp Or Gsp) Command Reference - HP Rp7410 - Server - 0 MB RAM Administrator's Manual

Command Reference for Service Processor Commands

Table 4-2 lists the commands available from the service processor command menu (the MP:CM>
or GSP:CM> prompt).
The following categories of commands are available:
• "Service Commands — Service Processor (MP or
• "Status Commands — Service Processor (MP or
• "System and Access Configuration Commands — Service Processor (MP or
Some commands are restricted to users with Operator or Administrator authority. Also note that
the available set of commands may differ depending on the utility revision level and server
hardware model.
For details on these commands, use the help (HE: Help) feature at the service processor Main
Menu. Enter the command name at the MP:HELP or GSP:HELP prompt for syntax, restrictions,
and other information.
Table 4-2 Service Processor (MP or GSP) Command Reference
Command
Service Commands — Service Processor (MP or GSP)
nPartition management.
BO
DF
MA
MR
PCIOLAD
PE
RE
RR
RS
TC
TE
VM
WHO
Status Commands — Service Processor (MP or GSP)
CP
HE
IO
LS
MS
PS
SYSREV
System and Access Configuration Commands — Service Processor (MP or GSP)
complex accounts, security, and nPartition configuration.
80 Using Management Interfaces and Tools
Description
Boot an nPartition past Boot is Blocked (BIB).
Display FRU information of an entity.
Return to the Main menu.
Modem reset.
Activate/deactivate a PCI card.
Power entities on or off.
Reset entity.
Reset an nPartition for reconfiguration; the nPartition remain inactive, in the shutdown
for reconfig state.
Reset an nPartition.
Send a TOC signal to an nPartition.
Broadcast a message to all users of the MP Command Handler.
Margin the voltage in a cabinet.
Display a list of MP connected users.
Commands for displaying hardware and nPartition information.
Display nPartition cell assignments.
Display the list of available commands.
Display IO chassis/cell connectivity.
Display LAN connected console status.
Display the status of the modem.
Display detailed power and hardware configuration status.
Display revisions of all firmware entities in the complex.
GSP)".
GSP)".
Commands for general server complex administration and
Commands for managing server
GSP)".