Table 27
Commands exclusive to the primary FCS (continued)
Command
secVersionReset
tsClockServer
wwn
zoneAdd
zoneCreate
zoneDelete
zoneRemove
zoneShow
Notes
Must be run from the primary FCS switch. Can also be run on a single
non-FCS switch which is segmented from a fabric.
Can be run on all switches to view the NTP server's IP address. You can only
modify the NTP server's IP address on the primary FCS switch.
This command can be run on all switches to view the WWN. With security
enabled the WWN of a switch cannot be modified.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Fabric OS 5.x command reference guide 775