Firmwarerestore - HP StorageWorks 2/64 - Core Switch Command Reference Manual

firmwareRestore

Restores the former active firmware image.
Synopsis
firmwarerestore
Availability
admin
Description
Use this command to restore the former active firmware image. This command can only be run if
autocommit was disabled during the firmwareDownload.
After a
firmwareDownload
becomes active. If you then do not want to commit the firmware and want to restore the former firmware,
run firmwareRestore. After running firmwareRestore, you can run
This command reboots the system and makes the former firmware active. After reboot, both primary and
secondary partitions restore to the former firmware.
This command only takes action if the system is booted after a firmwareDownload; otherwise, it returns
with an error code.
Operands
none
Examples
To restore the former active firmware image:
switch:admin> firmwarerestore
Restore old image to be active ...
Restore both primary and secondary image after reboot.
The system is going down for reboot NOW !!
Broadcast message from root (ttyS0) Fri Oct 26 23:48:54 2001...
Doing firmwarecommit now.
Please wait ...
See also
firmwareCommit
firmwareDownload
and a reboot (with autocommit disabled), the downloaded firmware
firmwareDownload
Fabric OS 5.x command reference guide 247
again.