Configdefault - HP StorageWorks 2/64 - Core Switch Command Reference Manual

configDefault

Restores the system configuration to default.
Synopsis
configdefault
Availability
admin
Description
Use this command to reset a subset of configuration settings to the default values.
All configuration parameters, with the following exceptions, are reset:
• Ethernet MAC address, IP address, and subnetmask
• IP gateway address
• License keys
• OEM customization
• Product ID and vendor ID
• SNMP configuration
• System name
• world wide name
• HP Advanced Zoning configuration
• Security parameters and policies
• User account passwords
• Switch PID format
• Ethernet link mode
Some configuration parameters are cached by the system. To avoid unexpected switch behavior, reboot
the system after executing this command.
NOTE: See the
parameters.
This command cannot be executed on an enabled switch. You must first disable the switch using the
switchDisable
Some configuration parameters are cached by the system. To avoid unexpected system behavior, reboot
the system after exciting this command.
Operands
none
command for more information on default values for configuration
configure
command.
Fabric OS 5.x command reference guide 113