Mstdenable - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
msTdEnable
Enables the Management Server (MS) topology discovery service.
Synopsis
mstdenable ["ALL"]
Availability
admin
Description
Use this command to enable the MS topology discovery service on a local switch or on the entire fabric.
This change takes effect immediately and commits to the configuration database for all affected switches.
If the operand "ALL" is used, this command attempts to enable the MS topology discovery service on all
switches in the fabric.
NOTE:
When security is enabled, and using the "ALL" operand, this command can be issued only from
the primary FCS switch.
Operands
This command has the following operand:
"ALL"
Examples
To enable the MS topology discovery service on the local switch only:
switch:admin> mstdenable
Request to enable MS Topology Discovery Service in progress....
done.
*MS Topology Discovery enabled locally.
To enable MS topology discovery on all the switches in the fabric:
switch:admin> mstdenable "ALL"
Request to enable MS Topology Discovery Service in progress....
done.
*MS Topology Discovery enabled locally.
*MS Topology Discovery Enable Operation Complete!!
See also
msTdDisable
msTdReadConfig
358 Fabric OS commands
Enables the MS topology discovery service throughout the entire
fabric. This operand is optional..
Advertisement
Table of Contents
