Table 28
switchAdmin commands (continued)
Command
portErrShow
portFlagsShow
portLogClear
portLogConfigShow
portLogDump
portLogDumpPort
portLogEventShow
portLoginShow
portLogPdisc
portLogReset
portLogResize
portLogShow
portLogShowPort
portLogTypeDisable
portLogTypeEnable
portName
portPerfShow
portRouteShow
portShow
portStats64Show
portStatsClear
portStatsShow
portRouteShow
portSwapDisable
portSwapEnable
portSwapShow
psShow
Description
Displays port error summary.
Displays the port status bitmaps for all ports in a switch.
Clears the port log.
Displays the current port log configuration.
Displays the port log without page breaks.
Displays the port log of specified port, without page breaks.
Displays information about port log events.
Displays port login status.
Sets or clears the debug_pdisc_flag.
Enables the port log facility.
Resizes the port log to the specified number of entries.
Displays the port log.
Displays the port log of specified port, with page breaks.
Disables the port log of a specified type.
Enables the port log of a specified type.
Assigns or displays a port name.
Displays port throughput performance in bytes, kilobytes, or megabytes.
Displays routing tables for the specified port.
Displays port status.
Displays the 64-bit hardware statistics for a port.
Clears the hardware statistics of a specified switch port.
Displays port hardware statistics.
Swaps area numbers of two ports.
Disables the portswap feature.
Enables the portswap feature.
Displays the state of the portswap feature.
Displays power supply status.
Fabric OS 5.x command reference guide 783