HP StorageWorks 2/64 - Core Switch Command Reference Manual page 574

To enable a security policy that includes three FCS switches specified by domain, WWN address, and
switch name:
fcsprimary:admin> secmodeenable
Your
installed on this equipment is subject to the End User License Agreement
provided
which you may review at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the
these
promptly contact the entity from which you obtained this software and do
not use these security features.
Do you agree to these terms?
This command requires Switch Certificate,
license to be installed on
PLEASE NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
This is an interactive session to create a FCS list.
The new FCS list is empty.
Enter WWN, Domain, or switch name(Leave blank when done): 102
Switch WWN is 10:00:00:60:69:80:04:0f.
The new FCS list:
10:00:00:60:69:80:04:0f
Enter WWN, Domain, or switch name(Leave blank when done):
10:00:00:60:69:80:04:0e
Switch WWN is 10:00:00:60:69:80:04:0e.
The new FCS list:
10:00:00:60:69:80:04:0f
10:00:00:60:69:80:04:0e
(continued on next page)
574 Fabric OS commands
use of the certificate-based
with the equipment and the Certification
documents. If you
security features
do not agree to the terms of these documents,
(yes, y, no, n): [no] y
Security license and Zoning
every switch in the fabric.
of the software
Practices Statement,
terms of