perfDelEEMonitor
Deletes one or all end-to-end performance monitors from a port.
Synopsis
perfdeleemonitor [slotnumber/]portnumber [monitorId]
Availability
admin
NOTE:
This command requires a Performance Monitor license.
Description
Use this command to delete an end-to-end performance monitor from a port, or all such monitors
associated with a port.
Operands
This command has the following operands:
slotnumber
portnumber
monitorId
Optionally, a comma can separate the operands. A space is required to separate the operands even
when using commas.
Examples
To delete an end-to-end monitor on a port, or all such monitors:
switch:admin> perfdeleemonitor 7/2 5
End-to-End monitor number 5 deleted
switch:admin> perfdeleemonitor 7/2
This will remove ALL EE monitors on port 2, continue? (yes, y, no, n):
[no] y
See also
perfAddEEMonitor
perfShowEEMonitor
For bladed systems only, this operand specifies the slot number of the
port on which the monitor is to be added, followed by a slash (/).
Specifies the number of the port on which the monitor is to be added,
relative to its slot for bladed systems. Use
ports.
Specify the monitor number to delete. Monitor numbers are defined
when created and can be displayed using perfShowEEMonitor. This
operand is optional. If not specified, all monitor counters on the port are
deleted.
for a list of valid
switchShow
Fabric OS 5.x command reference guide 417