ifModeShow
Displays the link operating mode for a network interface.
Synopsis
ifmodeshow [interface]
Availability
all users
Description
Use this command to display the link operating mode for a network interface.
Operands
This command has the following operand:
interface
Examples
To display the link operating mode for the eth0 Ethernet interface:
switch:admin> ifmodeshow eth0
Link mode: negotiated 100baseTx-HD, link ok
See also
ifModeSet
304 Fabric OS commands
Specify the name of the interface. You might specify the name
with quotation marks, but using them is not required. For
example, you can use either eth0 or "eth0", where eth is
the network interface and 0 is the physical unit.