Diagskiptests - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
diagSkipTests
Enables or disables diagnostics skip test flags.
Synopsis
diagskiptests [value | -show]
Availability
admin
Description
Use this command to enable or disable the diagnostics skip test flags. The skip test flags are saved in
flash memory and stay set until the next execution of diagSkipTests.
The mode becomes active as soon as this command is executed. It does not require a reboot to take
effect.
The skip test flags are used to skip the execution of certain POSTs that might prove hazardous to normal
switch operation. The exact use of this flag is determined by the POST scripts and the specific test
methods used.
Operands
This command has the following operands:
value
-show
If no operand is specified, the current value is displayed.
Examples
To display the current skip test flags:
switch:admin> diagskiptests -show
Skip tests is 1.
Specify a bit mask for tests to skip.
If specified or no value is given, the current skip test flags
displays.
Fabric OS 5.x command reference guide 159
Advertisement
Table of Contents
