HP StorageWorks 2/64 - Core Switch Command Reference Manual page 492

Port
Cmd
Args
492 Fabric OS commands
sn Speed negotiation states
fcin Incoming fibre channel information unit
fcout Outgoing fibre channel information unit
read Information unit header log from read operation
write Information unit header log from write operation
err Information unit header log of an fc error frame
frame fc frame payload
nsRemQ Inter-switch name server query
rscn RSCN
xalloc Allocate an exchange
xfree Free an exchange
xerr Exchange error
xstate Exchange state
payload Frame payload
Displays the port number that logged the event.
Defined by the event. Displays a value defined by the event as follows:
ioctl I/O control command code
Tx & Rx Frame payload size
scn New state (see state codes below)
pstate New physical state (see pstate codes below)
ctin The CT-subtype:
fc
f8
ctout Same as ctin above.
errlog Error level (see errModuleShow)
loopscn Current loop state during loop initialization, possible values
are:
OLP
LIP
LIM
BMP
OLD
TMO
Displays additional information about the event as follows:
start Start type: 0 = enable ports, 100 = disable ports
disable State (see state codes next)
enable Mode: 0 = normal
nonzero = loopback
Tx & Rx Header words 0,1,4 (R_CTL,D_ID,S_ID,OX_ID,RX_ID) and
the first payload word
reject FC-PH reject reason
busy FC-PH busy reason
Simple Name Server
Alias Server
Offline (disconnected or nonparticipating)
FL_Port entered INITIALIZING or OPEN_INIT state
LISM completed, FL_Port became the loop master
Loop init completed, FL_Port in MONITORING
state
Port transited to the OLD_PORT state
Loop init times out