Timeout - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
timeout
Sets or displays the idle timeout value for a login session.
Synopsis
timeout [timeval]
Availability
admin (set and display)
all users (display only)
Description
Use this command without an operand to display, in minutes, the current timeout value after which idle
logins are automatically terminated.
Use this command with the timeval operand to set the login timeout value to the specified interval. A
value of 0 disables timeout functionality of login sessions.
Operands
This command has the following operand:
timeval
Examples
To set the idle timeout to 10 minutes:
switch:admin> timeout 10
IDLE Timeout Changed to 10 minutes
The modified IDLE Timeout will be in effect after NEXT login
See also
none
Specify the number of minutes for the Telnet timeout value. Valid values are 1 to
99,999, or 0 to disable login timeouts. This operand is optional; if omitted, the
command displays the current timeout value.
Fabric OS 5.x command reference guide 711
Advertisement
Table of Contents
