Fandisable - HP StorageWorks 2/64 - Core Switch Command Reference Manual
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
fanDisable
Disables a fan unit.
Synopsis
fandisable unit
Availability
admin
Description
Use this command to disable a nonfaulty fan unit by setting the RPM speed to 0.
NOTE:
This command is not available on nonbladed systems except for the HP StorageWorks SAN
Switch 4/32.
Operands
This command has the following operand:
unit
Examples
To disable a fan unit:
switch:admin> fandisable 1
Fan unit 1 has been disabled
See also
fanEnable
fanShow
198 Fabric OS commands
Specify the fan's unit number to disable. View the fan unit
numbers using the
fanShow
required.
command. This operand is
Advertisement
Table of Contents
