HP StorageWorks 2/64 - Core Switch Command Reference Manual page 676
Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs
Also See for StorageWorks 2/64 - Core Switch:
- Reference manual (278 pages) ,
- Installation manual (166 pages) ,
- Administrator's manual (152 pages)
Table of Contents
Advertisement
•
portErrShow
•
fwSamShow
•
agtCfgShow
•
slotShow
• emtraceshow
• emtraceshow2
• emhsmtraceshow
• systraceshow -d
•
fwAlarmsFilterShow
•
chassisShow
•
timeout
•
historyShow
•
portSwapShow
•
configShow
•
extend (DISABLED by default)
• buffers (per-port)
• credits (per-port)
• data (per-port)
• phantom (per-port)
• properties (per-port)
• statistics (per-port)
•
filter (DISABLED by default; this group has lengthy output)
• filterportshow (per-port)
•
perfmon (DISABLED by default)
• ps_dump (per-port; this group has lengthy output)
•
ficon (DISABLED by default; this group has lengthy output)
•
ficoncupshow
•
ficoncupshow
• ficonDbg dump rnid
• ficonDbg log
•
ficonShow
•
ficonShow
•
ficonShow
•
ficonShow
•
ficonShow
• ficucmd dump -A
Operands
This command has the following operands:
slotnumber/portnumber1
-portnumber2
676 Fabric OS commands
(product-dependent)
fmsmode
modereg
ilir
lirr
rlir
rnid
switchrnid
Specify the range of ports to display. If the
slotnumber/portnumber parameter is omitted, all ports
in the switch display in the per-port outputs. The
slotnumber must be provided when specifying a range of
ports on multi-bladed products.
Advertisement
Table of Contents
