Configure - HP StorageWorks 2/64 - Core Switch Command Reference Manual

configure

Modifies system configuration parameters.
Synopsis
configure
Availability
admin
Description
Use this command to change the following system configuration parameters:
• Switch fabric settings
• Virtual channel settings
• Zoning operation parameters
• RSCN transmission mode
• Arbitrated loop parameters
• System services
• Portlog events settings
• Application attributes
NOTE: If executed on an enabled switch, only the application attribute can be configured. To access all
parameters controlled by this command, you must disable the switch using the
command.
The
configure
consist of a text prompt, a list of acceptable values, and a default value (in brackets).
Use the following options to control input:
Return
Interrupt
(Ctrl-C)
End-of-file
(Ctrl-D)
Switch fabric settings
There are several settings that control the overall behavior and operation of the fabric. Some of these, such
as the domain, are assigned automatically by the fabric and might differ from one switch to another in the
fabric. Other parameters, such as the BB credit, can be changed for specific applications or operating
environments but must be in agreement among all switches to allow formation of the fabric.
command is navigated using a series of menus. Top-level and associated submenus
When entered at a prompt with no preceding input, accepts the
default value (if applicable) and moves to the next prompt.
Aborts the command immediately and ignores all changes
made. This keystroke is common on many computers but can be
different on your system.
When entered at a prompt with no preceding input, terminates
the command and saves changes made. This keystroke is
common on many computers but might be different on your
system.
switchDisable
Fabric OS 5.x command reference guide 123