Diagpost - HP StorageWorks 2/64 - Core Switch Command Reference Manual

diagPost

Sets or displays diagnostic POST configuration.
Synopsis
diagpost [mode | -show]
Availability
admin
Description
Use this command to enable or disable POST testing. The mode is saved in flash memory (and stays in
that mode) until the next execution of diagPost. The mode becomes active as soon as this command is
executed; it does not require a reboot to take effect.
POST mode modifies the behavior of the diagnostics daemon program to inhibit testing of switch blades
when the system is first powered on or a new blade is added.
NOTE: To enable or disable diagnostic POST, the recommended method is to use
and diagDisablePost.
Operands
This command has the following optional operands:
mode
-show
If no operand is specified, the current value is displayed.
Examples
To enable and then disable the POST test:
switch:admin> diagpost
Diagnostic POST is currently disabled.
switch:admin> diagpost 1
Config update Succeeded
Diagnostic POST is now enabled.
See also
diagDisablePost
diagEnablePost
Specify 1 to enable, 0 to disable POST test.
Specify this operand to display the current mode.
diagEnablePost
Fabric OS 5.x command reference guide 151