HP StorageWorks 2/64 - Core Switch Command Reference Manual page 801

digital certificate An electronic document issued by a CA (certificate authority) to an entity, containing the
public key and identity of the entity. Entities in a secure fabric are authenticated based on
these certificates. See also authentication, CA,
disparity The proportion of 1s and 0s in an encoded character. Neutral disparity means an equal
number of each, positive disparity means a majority of 1s, and negative disparity means a
majority of 0s.
DLS Dynamic load-sharing. Dynamic distribution of traffic over available paths. Allows for
recomputing of routes when an Fx_Port or E_Port changes status.
DMTF Distributed Management Task Force.
domain controller A domain controller or embedded port communicates with and gets updates from other
switches' embedded ports. The well-known address is fffcdd, where dd = domain number).
domain ID A unique identifier for all switches in a fabric, used in routing frames. Usually automatically
assigned by the principal switch but can be assigned manually. The domain ID for an HP
StorageWorks switch can be any integer between 1 and 239.
DTE Data terminal equipment. Usually refers to a terminal.
DWDM Dense wave division multiplexing. Allows more wavelengths to use the same fiber. See WDM.
E_D_TOV Error-detect timeout value. The minimum amount of time a target waits for a sequence to
complete before initiating recovery. Can also be defined as the maximum time allowed for a
round-trip transmission before an error is declared. See also R_A_TOV, RR_TOV.
E_Port Expansion port. A standard Fibre Channel mechanism that enables switches to network with
each other, creating an ISL. See also ISL.
ECCN Export classification control number. A government classification of encryption. For example,
SSH is in the high-encryption category (number 5x02) and therefore has certain restrictions
regarding its transfer.
edge fabric A Fibre Channel fabric connected to an FC router via an EX_Port (where hosts and storage are
attached in a meta-SAN).
EE_Credit End-to-end credit. The number of receive buffers allocated by a recipient port to an originating
port. Used by Class 1 and 2 services to manage frame exchange across the fabric, between
source and destination. See also BB_Credit,
EIA rack A storage rack that meets the standards set by the Electronics Industry Association (EIA).
ELP Exchange link parameters.
ELS Extended link service. ELSs are sent to the destination N_Port to perform the requested function
or service. ELS is a Fibre Channel standard that is sometimes referred to as "Fibre Channel
Physical (FC_PH) ELS."
EM Environmental monitor. Monitors FRUs and reports failures.
An embedded port (or domain controller) communicates and get updates from other switches'
embedded port
embedded ports. The well-known address is fffcdd, where dd = domain number.
EMI Electromagnetic interference.
emulex A brand of host bus adapter.
enabled zone The currently enabled configuration of zones. Only one configuration can be enabled at a
configuration time. See also defined zone configuration,
public key.
end-to-end flow control.
zone configuration.
Fabric OS 5.x command reference guide 801