Switchshow - HP StorageWorks 2/64 - Core Switch Command Reference Manual

switchShow

Displays switch and port status.
Synopsis
switchshow [-portcount]
Availability
all users
Description
Use this command to display switch and port status information. Information might vary by switch model.
Switch summary information; it is followed by a section covering summary information by port:
switchName
switchType
switchState
switchMode
switchRole
switchDomain
switchId
switchWwn
switchBeacon
bladeBeacon
The switch summary is followed by one line per port:
Area
Slot
Port
Media Type
Speed
Displays the switch symbolic name.
Displays the switch model number.
Displays the switch state: online, offline, testing, or faulty.
Displays the switch mode: native or interop.
Displays the switch role: principal, subordinate, or disabled.
Displays the switch domain ID: 0 to 31 or 1 to 239.
Displays the switch embedded port D_ID.
Displays the switch world wide name (WWN).
Displays the switch beaconing state (on or off).
Displays the blade beaconing state (on or off).
Part of the 24-bit port ID, which consists of domain, area number, and
optional AL_PA.
Slot number; slots numbered from 1 to 4 and 7 to 10.
Port number; ports are numbered from 0 to 15 or 0 to 31.
Media type:
dash (--) no module present
sw shortwave laser
lw longwave laser
cu copper
id serial I
Speed of the port:
1/8G 25 Mbit/sec
1/4G 250 Mbit/sec
1/2G 500 Mbit/sec
1G 1Gb/s fixed transfer speed
2G 2 Gb/s fixed transfer speed
N1 1 Gb/s negotiated transfer speed
N2 2 Gb/s negotiated transfer speed
4G 4 Gb/s negotiated transfer speed
AN Auto negotiating
UN Unknown
Fabric OS 5.x command reference guide 691