HP StorageWorks 2/64 - Core Switch Command Reference Manual page 24

Hp storageworks fabric os 5.x command reference guide (aa-rvhvb-te, september 2005)
Hide thumbs Also See for StorageWorks 2/64 - Core Switch:
Table of Contents

Advertisement

--add server [-p port] [-s secret] [-t timeout] [-a chap | pap]
--remove server
--change server [-p port] [-s secret] [-t timeout] [-a chap | pap]
--move server to_position
--radius [on | off]
--switchdb [on | off]
Examples
To display the current RADIUS configuration:
switch:admin> aaaconfig --show
Position
1
192.168.233.48
2
192.168.233.44
3
radserver
Primary AAA Service: Switch database
Secondary AAA Service: None
To change the configuration for server 192.168.233.48:
switch:admin> aaaconfig --change 192.168.233.48 -p 3002 -s newsecret -t 1
See also
none
24
Fabric OS commands
Add the specified server to the end of the RADIUS
configuration list, with the specified port number, shared
secret, timeout, and if PAP or CHAP is to be used as
authentication protocol. server must be different from the
servers in the existing configuration.
Remove the specified server from the RADIUS configuration
list.server must match a server in the existing configuration.
To remove the last server, you must disable the RADIUS
configuration first.
Change parameters for the specified server in the existing
RADIUS configuration list. server must match one in the
existing configuration.
Move the specified server in the existing RADIUS configuration
list from the current position to the specified new position. This
rearranges the order in which the specified RADIUS server is
used.
Enable or disable the current RADIUS configuration for AAA
services. This is used to switch the primary AAA services
between RADIUS and the switch local database. To enable the
RADIUS configuration, there must be at least one server
existing in the configuration.
Enable or disable the switch local database as the secondary
AAA services. When enabled, if RADIUS requests a timeout for
all RADIUS servers, the switch local database is used for
authentication; otherwise, requests are denied.
Server
Port
Secret
1812
sharedsecret 3
1812
sharedsecret 3
1812
private
Timeout(s)
Auth-Protocol
CHAP
CHAP
5
CHAP

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks fabric os 5

Table of Contents