Nszonemember - HP StorageWorks 2/64 - Core Switch Command Reference Manual

nsZoneMember

Displays the information of all the online devices zoned with the given device.
Synopsis
nszonemember -a | -u | pid | wwn
Availability
all users
Description
Use this command to display information about all the online devices zoned with the given device.
Issuing this command without operands displays all online devices zoned with the given device. Each line
of output displays:
Type
Pid
COS
PortName
NodeName
Permanent Port
Name
DeviceType
There might be additional lines if the device has registered any of the following information (the switch
automatically registers SCSI inquiry data for FCP target devices):
• FC4 supported
• IP address (node)
• IPA
• port and node symbolic name (local device only)
• fabric port name
• hard address and/or port IP address
Operands
This command has the following operands:
-a
-u
pid | wwn
382 Fabric OS commands
U for unknown, N for N_Port, NL for NL_Port
The 24-bit Fibre Channel address
A list of classes of service supported by the device
The device's port world wide name (WWN)
The device's node WWN
Physical N_Port or NL_Port WWN
The device's type
Displays each local device's online zoned device data, including the PID
and zone alias.
Displays all the unzoned devices in the entire fabric. The device data
displayed includes the device PID and zone alias.
Specifies the port ID or WWN, respectively, whose zoned devices are to
be viewed. This operand is required.